1. Parker CZPT pump T6 Single Vane Pump
2. Design T6E, T6ER, T7ERS, T6ERM T7ES, T6EM T7ES, T7BS T7E T7ES T7DS T7DRS,
T6C, T6CM T6CR T6CRM T6CRM T6CR,
T6D, T6DM T6DR, T6DMY T6DRMY T6DRM
3. Interchangeable Vane Pump cartridge displacement as adhere to:
T6C vane pump: 003, 005, 006, 008, 571, 012, 014, 017, 571, 571, 571, 571, 031
T6D vane pump: 014, 017, 571, 571, 571, 031, 035,038, 042, 045, 050
T6E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085
T7E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085
T6c T6cm T6crm T6cr T6cy T6d T6ds T6dm T6em T6emy T7ey T7emy T7bs T7dbs T7dy
4. Function below.
The substantial stress vane pump incorporates the design of vane pin holdout.
They are applicable for individuals hydraulic machineries that demand from customers higher rotation force and lower noise amount.
The vane pump sequence are developed for applications in die casting devices, injection molding devices and other particular design equipments.
CZPT fluid: Before beginning undertaking plHangZhou, make sure you refer to our data sheets RE 95710 (mineral oil), RE 95711 (environmentally acceptable hydraulic fluids) and RE 95713 (HF hydraulic fluids) for in depth information relating to the decision of hydraulic fluid and application conditions.
The proper option of hydraulic fluid demands understanding of the working temperature in relation to the ambient temperature: in an open up circuit the tank temperature. The hydraulic fluid should be selected so that the functioning viscosity in the working temperature assortment is within the optimum assortment – the shaded location of the variety diagram. We suggested that the increased viscosity class be selected in each circumstance. Illustration: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum working viscosity selection (shaded spot) this corresponds to the viscosity classes VG 46 or VG sixty eight to be picked: VG 68.You should be aware: The circumstance drain temperature, which is affected by force and pace, is usually higher than the tank temperature. At no level in the system could the temperature be larger than 240°C (115°C) for sizes five to 200 or 195°F (90°C) for measurements 250 to 500.If the over problems can’t be maintained thanks to intense functioning parameters, we recommend flushing the circumstance at port U (dimensions 250 to 500).
