SS316L Compelled circulation evaporator
This is a System for Ammonium Sulfate manufacturing named Double Result Pressured Variety Circulation Evaporation Crystallizer, Or Double Effect OSLO Crystallizer. feeding is liquid, last item is the salt for marketing.
Double Effect Forced Variety Circulation Evaporation Crystallizer is operating under vacuum, so it is energy conserving. compelled kind pump also support for slurry crystal liquid movement, overlook pipeline blocking or scaling.
Double Impact Pressured Type Circulation Evaporation Crystallizer mixed with 1st effect heater, 1st effect separator, 2nd effect heater, 2nd impact separator, 1st preheater, 2nd preheater, 3rd preheater, 4th preheater,and condenser, pumps, pipeline and valves etc.
Double Impact Forced Type Circulation Evaporation Crystallizer is also suit for carry on production of : Sodium Sulfate, Ammonium Sulfate, Tomato Paste manufacturing, NaCl , lithium carbonate ,large salt squander drinking water and so forth.
This machine is CZPT with conductive oil heating with stable temperature of 200-220ºC
Pursuing is the photo which equipment installed in client’s manufacturing facility:
1. Introduction for pressured circulation evaporator
one) . Double result pressured circulation evaporator
Product : GLFC-02-XXXX
Handing capacity ( (T/hr ) : two,four,5,6,10,11…
two) . Single result forced circulation evaporator :
Model : GLFC-02-XXXX
Handing capability ( T/ hr ) : 1,one.five,2…
2. Software Spot :
It is suited for the evaporation and crystallization of resources with large focus, high viscosity, insoluble solids and so on .
For example, the restoration of sodium chloride, sodium sulfate, ammonium chloride, ammonium sulfate, and so on.
3. Primarily parameter :
1). The focus ratio is huge and the circulation kind is forced, so that the liquid with greater viscosity is simple to movement and evaporate.
2).Through the forced circulation, the evaporator can be heated evenly in the tube and can prevent the “dry wall” phenomenon.
three).The down sides are largely the big volume of the pump and the comparatively large electrical energy use. At the identical time, thanks to the large movement of the pump, the gear will vibrate drastically and it have to be attached to the support of the workshop or the steel composition.
4.Method introduction
Evaporator, separator (crystallizer), condenser, circulation pump, inter motion pump or material management valve, vacuum and drainage technique, sub cylinder, procedure system, electrical instrument control cupboard, valve and pipeline technique.
