High Pressure Solids Dewater Slurry Mud Filter Press Pump

Centrifugal Horizontal Slurry Pums Introduction: 
1. HS series slurry pump is designed for the continuous pumping of large abrasive, substantial density slurries with minimum upkeep demands. The donning parts are manufactured of extremely chrome alloy or rubber. It will sustain higher efficiency above the use life of its parts. 

2. The metallic wet components and rubber types can be interchangeable for dealing with various liquids or slurries.

three. HS slurry pumps are obtainable in sizes ranging from one inch to eighteen inch discharge and feature higher performance overall performance able of circulation costs from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for high head designs. 
four. CZPTurethane Parts can be interchangeable with rubber types.

الوظائف:
one. Cylindrical framework of bearing assembly: hassle-free to modify the space between impeller and front liner
ويمكن إزالتها بالكامل
2. Interchangeable anti-abrasive wet components made of substantial-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs provide large working stress capabilities
and an added measure of safety.
four. The discharge branch can be oriented to any 8 positions at the interval of forty five degrees
five. Different generate sorts: DC(direct relationship), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
SCR control, etc
six. The shaft seal uses the packing seal, expeller seal and mechanical seal

Normal Application:

For the content of donning areas,
"M" = سبيكة معدنية غنية بالكروم للغاية، "R" = مطاط مقاوم للتآكل

Welcome to contact us 7×24 for more specifics.
Any of your inquiry or tips will get our prompt attention and response !