Introduction:
one. HS series slurry pump is designed for the steady pumping of large abrasive, large density slurries with minimum upkeep demands. The wearing components are made of extremely chrome or and rubber. It will keep substantial effectiveness more than the put on lifestyle of its elements.
2. The steel soaked elements and rubber ones can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are accessible in sizes ranging from one inch to 18 inch discharge and feature large performance performance able of stream prices from 10.eight to 5400 m³/h and heads up to 125 meters for higher head designs.
Features:
one. Cylindrical composition of bearing assembly: hassle-free to adjust the room among impeller and front liner
and can beremoved totally
2. Interchangeable anti-abrasive damp elements produced of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher functioning force abilities
and an extra evaluate of protection.
4. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different generate varieties: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR management, etc
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Software:
| • CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
| • Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina CZPT | • Electricity Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Model | Max Electricity (Kw) |
Inlet & Outlet dimension (inch) | Material for Put on Components | Movement Rate (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | 12.6~28.8 | three.five~eight | six~68 | 1200~3800 | 152 |
| R | ten.8~25.two | 3~7 | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | fifteen | two/1.five | M | 32.4~seventy two | 9~twenty | six~58 | 1200~3200 | 184 |
| R | twenty five.2~fifty four | seven~fifteen | 5.five~forty one | a thousand~2600 | 178 | |||
| 50HS-C | 30 | 3/two | M | 39.6~86.four | eleven~24 | twelve~64 | 1300~2700 | 214 |
| R | 36~75.6 | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~fifty five | 9~52 | one thousand~2200 | 245 |
| R | seventy nine.two~a hundred and eighty | 22~50 | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | sixty | six/4 | M | 162~360 | forty~100 | twelve~56 | 800~1550 | 365 |
| R | 144~324 | 40~ninety | 12~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | eight/6 | M | 360~828 | a hundred~230 | 10~sixty one | 500~1140 | 510 |
| R | 324~720 | 90~200 | 7~forty nine | four hundred~1000 | 510 | |||
| 200MS-E | a hundred and twenty | 10/eight | M | 666~1440 | 185~four hundred | fourteen~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | one hundred seventy~380 | eleven~61 | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | twelve~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | 7~45 | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | thirteen~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven-hundred~1500 | 13~57 | two hundred~four hundred | 1370 |
| 25HHS-C | 30 | one.5/1 | M | 16.two~34.2 | 4.5~9.five | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/two | M | 68.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | a hundred and twenty | four/3 | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/four | M | 324~720 | ninety~two hundred | thirty~118 | 600~one thousand | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | one hundred thirty~280 | 20~94 | 500~1000 | 711 |
For the content of putting on areas,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
Contact
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt interest and response !
