
Gasoline Cylinder Oxygen Filling Pump Respiratory Respirator
Oxygen filling pump is specifically designed for filling oxygen in small substantial pressure oxygen tanks.The oxygen is lifted from the gasoline cylinder and stuffed to a tiny quantity of oxygen cylinder to obtain the preferred strain worth, and is also ideal for the filling of non-combustible gases such as nitrogen and carbon dioxide.
Oxygen filling pump working basic principle:
Is through the plunger on the compressor repeatedly reciprocating motion to comprehensive treatment of inflatable bottle of oxygen filling, Both finishes of the cylinder in the 1st and CZPT stage are outfitted with suction valve and exhaust valve, its function is to manage the air movement course, the good quality of the suction and discharge valves have a considerable affect on charging effectiveness.When the plunger down a single level of fuel in the cylinder with enlargement, stress is decreased, when the level of the strain inside the cylinder is considerably less than massive oxygen tank inside of the strain of the gasoline, main air suction valve immediately open up fuel by air bottles into the amount inside the cylinderWhen the very first column plunges upward, the gas in the cylinder is compressed.
When the force is greater than the gas force in the CZPTary cylinder, the exhaust valve of the first course cylinder and the suction valve of the CZPTary cylinder are all open, and the gasoline in the 1st cylinder will stream into the CZPTary cylinder.When the CZPTary piston upward motion in the cylinder, the CZPTary air is compressed in the cylinder, stress, fuel pressure in the air when the pressure is increased than is inflatable bottle, the CZPTary vent via the one particular-way valve on the gasoline h2o separator, pneumatic change inflows to the air inside of the bottle, i.e. comprehensive an inflatable.
Advantages of oxygen filling pump:
It is appropriate for the filling and filling efficiency of oxygen and non-combustible gas, which is outstanding to the nationwide CZPT solution construction. It is little in dimensions and easy to keep and reduced value.
Item Function:
one. Suited for filling oxygen and inflammable gases.
two. higher charging effectiveness.
3. Item demanding composition, modest dimension, mild excess weight.
four.The solution is basic, straightforward upkeep, lower value.
Used range:
Mine rescue, hearth safety, petroleum, chemical market, metallurgy, health care, transportation, shipbuilding,protection.
Requirements:
| Model | AE101A | AE102A |
| Inflation pressure | 20Mpa | 30Mpa |
| Displacement under suction conditions | 5L/min | 3L/min |
| Voltage | 220V/380V | 220V/380V |
| Maximum compression ratio | four | eight |
| CZPT stages | one | 2 |
| Energy | 1.1KW | 2.2KW |
| Working temperature | -60ºC | -60ºC |
| Measurement | 860*565*640mm | 940*five hundred*700mm |
| Excess weight | 116kg | 120kg |
