Centrifugal Horizontal Slurry Pums Introduction:
one. HS series slurry pump is designed for the continuous pumping of large abrasive, large density slurries with minimal maintenance demands. The putting on areas are manufactured of ultra chrome alloy or rubber. It will preserve large effectiveness over the use life of its factors.
two. The metal damp parts and rubber ones can be interchangeable for handling various liquids or slurries.
three. HS slurry pumps are obtainable in measurements ranging from one inch to 18 inch discharge and attribute large performance functionality capable of stream costs from ten.8 to 5400 m³/h and heads up to a hundred twenty five meters for substantial head designs.
4. CZPTurethane Components can be interchangeable with rubber ones.
기능:
one. Cylindrical structure of bearing assembly: handy to alter the area among impeller and front liner
완전히 제거할 수 있습니다.
2. Interchangeable anti-abrasive soaked components made of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs give large running strain capabilities
and an extra measure of safety.
4. The discharge branch can be oriented to any 8 positions at the interval of 45 degrees
5. Different travel varieties: DC(direct connection), V-belt travel, equipment box reducer, hydraulic couplings, VFD,
SCR handle, and many others
six. The shaft seal uses the packing seal, expeller seal and mechanical seal
Common Software:
| • CZPT 처리 | • CZPT | • 석탄 세탁소 | • 사이클론 피드 |
| • 비엔토나이트 | • CZPT 슬러와이 | • 꼬리 | • 분쇄기 |
| • 재 처리 | • 터널 | • 폐슬러지 | • 굵은 모래 |
| • 석회질 진흙 | • 인산 | • 준설 | • CZPT |
| • 알루미나 CZPT | • 발전소 | • 칼륨 비료 공장 | • 기타 산업 |
| • 철광석 모래 | • 구리 포커스 | • 금광 | •몰리브덴 |
| 모델 | 최대 에너지 (킬로와트) |
Inlet & Outlet dimensions (inch) | Material for Use Components | Flow Rate (Q) | 머리 (시간) 미터 |
속도 (RPM) |
임펠러 직경 (mm) |
|
| m³/시간 | l/s | |||||||
| 25HS-B | 15 | 1.5/1 | 중 | 12.6~28.8 | 3.5~8 | 6~68 | 1200~3800 | 152 |
| 아르 자형 | 10.8~25.2 | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 두/하나.다섯 | 중 | 32.4~72 | 9~20 | 6~58 | 1200~3200 | 184 |
| 아르 자형 | 25.2~54 | 7~15 | 5.5~41 | 천~2600 | 178 | |||
| 50HS-C | 30 | 셋/둘 | 중 | 39.6~86.4 | 11~24 | 12~64 | 1300~2700 | 214 |
| 아르 자형 | 36~75.6 | 10~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 삼십 | 4/3 | 중 | 86.4~198 | 24~55 | 9~52 | 천~2200 | 245 |
| 아르 자형 | seventy nine.two~one hundred eighty | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | 중 | 162~360 | forty~a hundred | 12~56 | 800~1550 | 365 |
| 아르 자형 | 144~324 | 40~90 | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | 백이십 | 8/6 | 중 | 360~828 | 100~230 | 10~61 | 500~1140 | 510 |
| 아르 자형 | 324~720 | 90~200 | 749 | 400~a thousand | 510 | |||
| 200MS-E | 120 | 십/팔 | 중 | 666~1440 | 185~400 | fourteen~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 십/팔 | 중 | 612~1368 | 170~380 | 11~61 | 400~850 | 686 |
| 아르 자형 | 540~1188 | 150~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | 중 | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
| 아르 자형 | 720~1620 | 200~450 | seven~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | 중 | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
| 아르 자형 | 1152~2520 | 320~700 | 13~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | 중 | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | 중 | 2520~5400 | 700~1500 | 13~57 | 200~400 | 1370 |
| 25HHS-C | 삼십 | 1.5/1 | 중 | sixteen.two~34.two | four.five~9.five | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 셋/둘 | 중 | 68.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 백이십 | 넷/셋 | 중 | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | 백이십 | 6/4 | 중 | 324~720 | 90~200 | 30~118 | 600~천 | 711 |
| 150HHS-S | 560 | 8/6 | 중 | 468-1008 | 130~280 | 20~94 | five hundred~one thousand | 711 |
For the content of sporting components,
"M" = 금속성, 초고강도 크롬 합금, "R" = 내마모성 고무
Welcome to speak to us 7×24 for far more particulars.
Any of your inquiry or guidance will get our prompt focus and response !
