
ບົດນໍາ:
one. HS series slurry pump is designed for the steady pumping of large abrasive, large density slurries with minimum upkeep demands. The wearing components are made of extremely chrome or and rubber. It will keep substantial effectiveness more than the put on lifestyle of its elements.
2. The steel soaked elements and rubber ones can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are accessible in sizes ranging from one inch to 18 inch discharge and feature large performance performance able of stream prices from 10.eight to 5400 m³/h and heads up to 125 meters for higher head designs.
ຄຸນສົມບັດ:
one. Cylindrical composition of bearing assembly: hassle-free to adjust the room among impeller and front liner
ແລະສາມາດກຳຈັດອອກໄດ້ໝົດ
2. Interchangeable anti-abrasive damp elements produced of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher functioning force abilities
and an extra evaluate of protection.
4. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different generate varieties: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR management, etc
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Software:
| • ການປະມວນຜົນ CZPT | • CZPT | • ຖ່ານຫີນ ຮ້ານຊັກລີດ | • ອາຫານຈາກໄຊໂຄລນ |
| • ບເອນໂທໄນ | • ສຽງດັງຂອງ CZPTປີ | • ການຫາງ | • ການບົດແບບໂຮງສີ |
| • ການໂອນຂີ້ເທົ່າ | • ອຸໂມງ | • ຂີ້ຕົມຂີ້ເຫຍື້ອ | • ດິນຊາຍຫຍາບ |
| • ຂີ້ຕົມປູນຂາວ | • ກົດຟອສຟໍຣິກ | • ການຂຸດລອກດິນ | • CZPT |
| • ອາລູມິນາ CZPT | • ໂຮງງານໄຟຟ້າ | • ໂຮງງານປຸ໋ຍໂພແທດຊຽມ | • ອຸດສາຫະກຳອື່ນໆ |
| • ດິນຊາຍແຮ່ເຫຼັກ | • Copper Focus | • ບໍ່ແຮ່ຄຳ | •ໂມລີບດີນຳ |
| ຮຸ່ນ | ໄຟຟ້າສູງສຸດ (ກິໂລວັດ) |
ຂະໜາດທໍ່ເຂົ້າ ແລະ ທໍ່ອອກ (ນິ້ວ) | Material for Put on Components | Movement Rate (Q) | ຫົວ (ຮ) ແມັດ |
ຄວາມໄວ (ຮອບຕໍ່ນາທີ) |
ເສັ້ນຜ່າສູນກາງຂອງใบพัด. (ມມ) |
|
| ມ³/ຊມ | ລ/ວິນາທີ | |||||||
| 25HS-B | 15 | one.5/1 | ມ | 12.6~28.8 | three.five~eight | ຫົກ~68 | 1200~3800 | 152 |
| ຣ | ten.8~25.two | 3~7 | 7~ຫ້າສິບສອງ | 1400~3400 | 152 | |||
| 40HS-B | ສິບຫ້າ | two/1.five | ມ | 32.4~ເຈັດສິບສອງ | 9~ຊາວ | ຫົກ~58 | 1200~3200 | 184 |
| ຣ | twenty five.2~fifty four | seven~fifteen | 5. ຫ້າ~ສີ່ສິບເອັດ | ໜຶ່ງພັນ ~ 2600 | 178 | |||
| 50HS-C | 30 | 3/ສອງ | ມ | 39.6~86.4 | ສິບເອັດ~24 | ສິບສອງ~64 | 1300~2700 | 214 |
| ຣ | 36~75.6 | ສິບ~21 | ສິບສາມ~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | ມ | 86.4~198 | 24~fifty five | 9~52 | ໜຶ່ງພັນ ~ 2200 | 245 |
| ຣ | seventy nine.two~a hundred and eighty | 22~50 | ຫ້າ~34.5 | 800~1800 | 245 | |||
| 100HS-D | ຫົກສິບ | ຫົກ/ສີ່ | ມ | 162~360 | ສີ່ສິບ~100 | ສິບສອງ~56 | 800~1550 | 365 |
| ຣ | 144~324 | 40~ເກົ້າສິບ | 12~45 | 800~1350 | 365 | |||
| 150HS-E | ໜຶ່ງຮ້ອຍຊາວ | eight/6 | ມ | 360~828 | ໜຶ່ງຮ້ອຍ ~ 230 | 10~ຫົກສິບເອັດ | 500~1140 | 510 |
| ຣ | 324~720 | 90~200 | 7~ສີ່ສິບເກົ້າ | ສີ່ຮ້ອຍ ~ 1000 | 510 | |||
| 200MS-E | ໜຶ່ງຮ້ອຍຊາວ | 10/ແປດ | ມ | 666~1440 | 185~ສີ່ຮ້ອຍ | ສິບສີ່ ~ 60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | ມ | 612~1368 | ໜຶ່ງຮ້ອຍເຈັດສິບ ~ 380 | ສິບເອັດ~61 | 400~850 | 686 |
| ຣ | 540~1188 | ໜຶ່ງຮ້ອຍຫ້າສິບ ~ 330 | ສິບສອງ ~ 50 | ສີ່ຮ້ອຍ ~ 750 | 686 | |||
| 250HS-ST | 560 | 12/10 | ມ | 936~1980 | 260~550 | ເຈັດ~68 | ສາມຮ້ອຍ ~ 800 | 762 |
| ຣ | 720~1620 | ສອງຮ້ອຍ ~ 450 | 7~45 | ສາມຮ້ອຍ ~ 650 | 762 | |||
| 300HS-TU | 560 | 14/12 | ມ | 1260~2772 | 350~770 | ສິບສາມ~63 | ສາມຮ້ອຍ ~ 600 | 965 |
| ຣ | 1152~2520 | 320~700 | ສິບສາມ~ສີ່ສິບສີ່ | 300~ຫ້າຮ້ອຍ | 965 | |||
| 350HS-TU | 1200 | ສິບຫົກ/ສິບສີ່ | ມ | 1368~3060 | 380~850 | ສິບເອັດ~ຫົກສິບສາມ | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | ມ | 2520~5400 | ເຈັດຮ້ອຍ ~ 1500 | 13~57 | two hundred~four hundred | 1370 |
| 25HHS-C | 30 | one.5/1 | ມ | 16.two~34.2 | 4.5~9.five | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/ສອງ | ມ | 68.4~136.eight | 19~38 | ຊາວຫ້າ~87 | 850~1400 | 457 |
| 75HHS-E | ໜຶ່ງຮ້ອຍຊາວ | ສີ່/3 | ມ | 126~252 | 35~70 | 12~ເກົ້າສິບເຈັດ | 600~1400 | 508 |
| 100HHS-E | ໜຶ່ງຮ້ອຍຊາວ | 6/ສີ່ | ມ | 324~720 | ninety~two hundred | ສາມສິບ~118 | 600~ໜຶ່ງພັນ | 711 |
| 150HHS-S | 560 | ແປດ/ຫົກ | ມ | 468-1008 | ໜຶ່ງຮ້ອຍສາມສິບ~280 | 20~94 | 500~1000 | 711 |
For the content of putting on areas,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
ຕິດຕໍ່
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt interest and response !
