MZH-V100L cosmetic experience cream skincare vacuum emulsifying mixer equipment
CZPT-beschrijving
MZH-V100L vacuum emulsifying mixer consists of: oil tank, drinking water tank, vacuum homogeneous emulsifying machine, heating technique, mixing method, vacuum technique, electric lifting technique, procedure manage cabinet, piping technique. It is the most appropriate tools to create substantial-quality skin care creams or other creams merchandise
The materials moves in a large pace amongst the rotor and stator, what can engender a robust hydraulic shear electrical power to dispersing resources, meanwhile it can engender centrifugal electricity to extrude, milling, crash the material, eventually make the materials mixing, stirring, diminution to the preferred requirements. A lighting gap on the pot protect to observe the states of homogeneity. vacuum emulsifying mixer Entrance for places of material offer chance to insert essence and suchlike components. Either pour-out the materials by tilting the pot or from the base, the latter way can make the components enter the filling equipment right for quantitative filling. Simple to clean.
Management Method: The management technique is geared up with electronic time relay unit, so it can adjust time and velocity of homogenizer based mostly on different materials. All handle buttons are concentrated collectively,distinct at a glance.
| vacuum emulsifying mixer | |||
| NEE | Naam | CZPT-parameters | Main brand |
| 1 | Hoofdpot | Layout quantity: 100L Working volume:120L | |
| 2 | Materials &Dikte | Interior Layer:3mm (Mirror: 400MESH) | SUS316L |
| Center Layer: 3mm | SUS 304-2B | ||
| Cotton insulation is expanded perlite | |||
| Out Layer: 2mm (Mirror:300MESH) | SUS 304-2B | ||
| drie | CZPT Hole |
|
|
| Pot Bottom: Discharge hole, Temperature detection hole. | |||
| 4 | Stirring Way | CZPT agitator stirring scraper | SUS316L |
| Scraping blade PTFE content, snapping stirring the pot wall, so the materials does not stick pot wall combined. | Japan CZPT | ||
| There are two sets of stirring shaft mixing method, ahead and reverse mixing, the mixing approach can be up and down, left and proper roll. Bearing brand NSK. Bidirection blending,Equally Scraping and Center agitator with inverter |
Japan NSK | ||
| Bottom temperature probe bulb to 20mm can accurately measure the temperature of the material. Temperature Sensor. | Japan Omron | ||
| Up-mixing Motor: one.5KW | ABB | ||
| Up-mixing Frequency management: ~63r/min | CZPT | ||
| 5 | Homogeneous | Homogenizer as SUS 316L strong stainless steel material, by laser machining procedure from many species such as helical vane cavity framework and the specific work in strict accordance with Japan attractiveness he company to make higher precision, strong shear. Homogeneus on the Prime with inverter, and the seal have to be flushed by h2o |
Japan CZPT |
| Homogenizer Motor :3KW | ABB | ||
| Homogenizer CZPT: -3040r/min | CZPT | ||
| 6 | CZPT | Dharma Blue sealed with silicone rubber O-ring | |
| Homogenizer utilizing the world CZPT German large-speed Mchanical seal | China manufacturer | ||
| Kettle with stirring using mechanical seal. | |||
| zeven | Heating way | CZPTtric heating, Water test pressure .4Mpa,functioning Strain<0.09Mpa | |
| acht | Discharge way | 1.Vacuum pressure bottom valve discharge 2. Handle wheel pour. |
|
| Can through Assortment pump or Pressure pump discharge. | |||
| 9 | Water tank | Doing work volume: 80L Design Quantity: 100L | |
| Internal Layer:3mm (Mirror: 400MESH) | SUS 316L | ||
| Middle Layer: 3mm | SUS 304-2B | ||
| Out Layer: 2mm (Mirror:300MESH) | SUS 304-2B | ||
| Beneath-mixing Motor: .75KW | ABB Motor | ||
| tien | Olie tank | Doing work volume: 50L Design Volume: 75L | |
| Internal Layer:2mm (Mirror: 400MESH) | SUS 316L | ||
| Center Layer: 2mm | SUS 304-2B | ||
| Out Layer: 1.5mm (Mirror:300MESH) | ABB Motor | ||
| 11 | Vacuum System | Making use of h2o ring vacuum pump to stay away from pump inhale oil, foam and so on., leading to blockage. | China CZPT manufacturer HangZhou |
| Vacuum pump Motor: .75KW | |||
| Vacuum suction tube is 304-2B connected. | |||
| H2o usage of vacuum pump 68L/min | |||
| 12 | CZPTtric Box | CZPTtrical control box for the SUS304-2B, Appearance of sand board. | |
| Control techniques for handbook push-button, effortless to operate. | |||
| Main Eectric elements of planet brand name Button by Japan Fuji, Schneider or Omron for Meter and Sensor. One the control panel must be capable to adjust and show the stirring pace, The pot temperature, The Temperature of the higher and reduced limitations manage, Emulsification time and slow mixing time options and other capabilities. | Schneider /Omron |
||
| Web fat | 850kg(Only for CZPT equipment) | ||
| Energie Spanning | 380V,50HZ. | ||
| GMP Regular | No system,no oil and h2o pot,all the stainless metal speak to with content is SUS316L stainless steel. Another location is SUS304-2B. | ||
II. CZPTry Main Parts
III. Our Manufacturing unit
IV. The Major Undertaking
V. Right after Sale Services
1. Guarantee time: A single 12 months guaranteed for good quality, merchandise entire lifestyle services any hurt except the incorrect procedure throughout guarantee. Period is fixed freely, But the travel and lodge expenses need to
be rely on customer.
2. Commissioning companies: The product’s set up and commissioning at the need aspect, our engineers will not go away there until get your arrangement.
three. Traning Services: Our engineers will prepare your personnel in your manufacturing facility or movie to function it in the course of the period of time of installation and commissioning, and they will not depart there till your personnel can function it effectively and generally.
four. Manintenance Providers: Any malfunction occurred, Once you inquiry us, We will reply you within
24 hours.
5. The File: The manual specification, report of the content which utilised to the equipment and other paperwork movie related to GMP authentication information will be offered by us.
VI. FAQ
1. Q: Are you manufacturing facility or investing business?
A: We are the expert manufacture of beauty machinery in China much more than 10years.
2. Q: The place is your place?
A: Business and Showroom located in HangZhou china, Manufacturing unit located in CZPTsu and ZheJiang
CZPT.
3. Q: Are your engineer be ready to serve in oversea?
A: Indeed, we have a good deal of encounter set up the device in oversea.
4. Q: What is your content of your merchandise?
A: adopt with complete stainless metal 304-2b and 316L
five. Q: How does your manufacturing facility do regarding good quality handle?
A: Two several years spare elements,and total-daily life services of our machinery.
Our Company to consumer gratification for the development of three objectives: Product quality, Product technologies and Right after-sales provider.
