Wstęp:
one. HS series slurry pump is designed for the steady pumping of large abrasive, large density slurries with minimum upkeep demands. The wearing components are made of extremely chrome or and rubber. It will keep substantial effectiveness more than the put on lifestyle of its elements.
2. The steel soaked elements and rubber ones can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are accessible in sizes ranging from one inch to 18 inch discharge and feature large performance performance able of stream prices from 10.eight to 5400 m³/h and heads up to 125 meters for higher head designs.
Cechy:
one. Cylindrical composition of bearing assembly: hassle-free to adjust the room among impeller and front liner
i można je całkowicie usunąć
2. Interchangeable anti-abrasive damp elements produced of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher functioning force abilities
and an extra evaluate of protection.
4. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different generate varieties: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR management, etc
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Software:
| • Przetwarzanie CZPT | • CZPT | • Węgiel Pralnia | • Podajniki cyklonowe |
| • Bentonit | • CZPT bełkoty | • Ogonowanie | • Mielenie młyna |
| • Przenoszenie popiołu | • Tunel | • Osady odpadowe | • Gruby piasek |
| • Błoto wapienne | • Kwas fosforowy | • Pogłębianie | • CZPT |
| • Tlenek glinu CZPT | • Elektrownia | • Zakład nawozów potasowych | • Inne branże |
| • Piasek rudy żelaza | • Miedziane skupienie | • Kopalnia złota | •Molibden |
| Model | Maksymalna elektryczność (kW) |
Wymiary wlotowe i wylotowe (cale) | Material for Put on Components | Movement Rate (Q) | Głowa (H) metr |
Prędkość (obr./min) |
Średnica wirnika (mm) |
|
| m³/godz. | l/s | |||||||
| 25HS-B | 15 | jeden,5/1 | M | 12.6~28.8 | three.five~eight | sześć~68 | 1200~3800 | 152 |
| R | ten.8~25.two | 3~7 | 7~pięćdziesiąt dwa | 1400~3400 | 152 | |||
| 40HS-B | piętnaście | two/1.five | M | 32,4~siedemdziesiąt dwa | 9~dwadzieścia | sześć~58 | 1200~3200 | 184 |
| R | dwadzieścia pięć,2~pięćdziesiąt cztery | seven~fifteen | 5.pięć~czterdzieści jeden | tysiąc~2600 | 178 | |||
| 50HS-C | 30 | 3/dwa | M | 39,6~86,4 | jedenaście~24 | dwanaście~64 | 1300~2700 | 214 |
| R | 36~75.6 | dziesięć~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~55 | 9~52 | tysiąc~2200 | 245 |
| R | seventy nine.two~a hundred and eighty | 22~50 | pięć~34,5 | 800~1800 | 245 | |||
| 100HS-D | sześćdziesiąt | sześć/4 | M | 162~360 | czterdzieści~100 | twelve~56 | 800~1550 | 365 |
| R | 144~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | sto dwadzieścia | osiem/6 | M | 360~828 | sto~230 | 10~sixty one | 500~1140 | 510 |
| R | 324~720 | 90~200 | 7~czterdzieści dziewięć | czterysta~1000 | 510 | |||
| 200MS-E | sto dwadzieścia | 10/osiem | M | 666~1440 | 185~czterysta | czternaście~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | sto siedemdziesiąt~380 | jedenaście~61 | 400~850 | 686 |
| R | 540~1188 | sto pięćdziesiąt~330 | dwanaście~50 | czterysta~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | siedem~68 | trzysta~800 | 762 |
| R | 720~1620 | dwieście~450 | 7~45 | trzysta~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | trzynaście~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | trzynaście~czterdzieści cztery | 300~pięćset | 965 | |||
| 350HS-TU | 1200 | szesnaście/czternaście | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | siedemset~1500 | 13~57 | dwieście~czterysta | 1370 |
| 25HHS-C | 30 | jeden,5/1 | M | 16.two~34.2 | 4.5~9.five | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/dwa | M | 68.4~136.eight | 19~38 | dwadzieścia pięć~87 | 850~1400 | 457 |
| 75HHS-E | sto dwadzieścia | cztery/3 | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | sto dwadzieścia | 6/4 | M | 324~720 | ninety~two hundred | trzydzieści~118 | 600~jeden tysiąc | 711 |
| 150HHS-S | 560 | osiem/sześć | M | 468-1008 | sto trzydzieści~280 | 20~94 | 500~1000 | 711 |
For the content of putting on areas,
„M” = stal, stop ultrachromowy „R” = guma antyścierna
Kontakt
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt interest and response !
