Wstęp:
1. HS series slurry pump is made for the ongoing pumping of higher abrasive, substantial density slurries with minimum upkeep specifications. The donning areas are made of ultra chrome or and rubber. It will keep high effectiveness above the use existence of its elements.
two. The metal moist elements and rubber kinds can be interchangeable for managing various liquids or slurries.
3. HS slurry pumps are offered in dimensions ranging from 1 inch to 18 inch discharge and attribute large efficiency performance able of stream prices from ten.eight to 5400 m³/h and heads up to one hundred twenty five meters for large head versions.
Atrybuty:
1. Cylindrical structure of bearing assembly: convenient to alter the room among impeller and entrance liner
i można je całkowicie usunąć
two. Interchangeable anti-abrasive moist elements made of higher-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs offer high operating strain capabilities
and an additional evaluate of safety.
4. The discharge department can be oriented to any 8 positions at the interval of 45 degrees
five. A variety of drive kinds: DC(immediate relationship), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
Zarządzanie SCR itp.
six. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Normal Software:
| • CZPT | • Przetwarzanie CZPT | • Przygotowanie węgla | • Podajniki cyklonowe |
| • Tunel | • Zawiesiny CZPT | • Odpady | • Mielenie młyna |
| • Przenoszenie popiołu | • Papier i celuloza | • Osady odpadowe | • Gruby piasek |
| • Błoto wapienne | • Kwas fosforowy | • Pogłębianie | • CZPT |
| • Tlenek glinu CZPT | • Elektrownia | • Zakład nawozów potasowych | • Inne branże |
| Projekt | Maksymalna elektryczność (kW) |
Rozmiar wlotu i wylotu (cale) | Material for Put on Elements | Stream Charge (Q) | Głowa (H) metr |
Tempo (obr./min) |
Średnica wirnika (mm) |
|
| m³/godz. | l/s | |||||||
| 25HS-B | piętnaście | 1.pięć/jeden | M | dwanaście,6~28,8 | 3.5~8 | six~sixty eight | 1200~3800 | 152 |
| R | 10.8~25.two | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | dwa/jeden,pięć | M | 32,4~siedemdziesiąt dwa | nine~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | twenty five.2~54 | 7~15 | 5.five~41 | 1000~2600 | 178 | |||
| 50HS-C | 30 | trzy/dwa | M | 39,6~86,4 | 11~24 | dwanaście~64 | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | trzydzieści | cztery/trzy | M | 86.four~198 | 24~55 | 9~52 | tysiąc~2200 | 245 |
| R | siedemdziesiąt dziewięć, dwa ~ sto osiemdziesiąt | 22~50 | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | czterdzieści~sto | twelve~56 | 800~1550 | 365 |
| R | sto czterdzieści cztery~324 | 40~90 | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | sto dwadzieścia | osiem/sześć | M | 360~828 | sto~230 | 10~61 | pięćset~1140 | 510 |
| R | 324~720 | 90~dwieście | 7~czterdzieści dziewięć | four hundred~a thousand | 510 | |||
| 200MS-E | 120 | 10/osiem | M | 666~1440 | 185~czterysta | czternaście~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/osiem | M | 612~1368 | sto siedemdziesiąt~380 | 11~sześćdziesiąt jeden | czterysta~850 | 686 |
| R | 540~1188 | sto pięćdziesiąt~330 | dwanaście~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~sixty eight | trzysta~800 | 762 |
| R | 720~1620 | dwieście~450 | 7~45 | trzysta~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | trzynaście~czterdzieści cztery | trzysta~500 | 965 | |||
| 350HS-TU | 1200 | 16/fourteen | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | dwadzieścia/18 | M | 2520~5400 | 700~1500 | 13~57 | 200~czterysta | 1370 |
| 25HHS-C | trzydzieści | 1.5/1 | M | sixteen.2~34.two | 4.5~9.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | trzy/dwa | M | sixty eight.four~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | sto dwadzieścia | 6/4 | M | 324~720 | dziewięćdziesiąt~200 | 30~118 | 600~tysiąc | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | 20~ninety four | pięćset~tysiąc | 711 |
For the material of putting on areas,
“M” = metal, ultra chromium alloy “R” = anti-abrasive rubber
Nawiązać kontakt z
Zapraszamy do kontaktu z nami w celu uzyskania informacji.
Your inquiry will get our prompt focus and response !
