
Giới thiệu:
one. HS series slurry pump is designed for the steady pumping of large abrasive, large density slurries with minimum upkeep demands. The wearing components are made of extremely chrome or and rubber. It will keep substantial effectiveness more than the put on lifestyle of its elements.
2. The steel soaked elements and rubber ones can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are accessible in sizes ranging from one inch to 18 inch discharge and feature large performance performance able of stream prices from 10.eight to 5400 m³/h and heads up to 125 meters for higher head designs.
Đặc trưng:
one. Cylindrical composition of bearing assembly: hassle-free to adjust the room among impeller and front liner
và có thể được loại bỏ hoàn toàn
2. Interchangeable anti-abrasive damp elements produced of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher functioning force abilities
and an extra evaluate of protection.
4. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different generate varieties: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR management, etc
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Software:
| • Xử lý CZPT | • CZPT | • Than đá Xưởng giặt | • Nguồn cấp lốc xoáy |
| • Bentonit | • Hỗn hợp CZPTy | • Bãi thải | • Nghiền bằng máy |
| • Xử lý tro tàn | • Đường hầm | • Bùn thải | • Cát thô |
| • Bùn vôi | • Axit photphoric | • Nạo vét | • CZPT |
| • Nhôm oxit CZPT | • Nhà máy điện | • Nhà máy sản xuất phân bón kali | • Các ngành công nghiệp khác |
| • Cát quặng sắt | • Copper Focus | • Mỏ vàng | •Molypden |
| Người mẫu | Điện năng tối đa (Kw) |
Kích thước đầu vào & đầu ra (inch) | Material for Put on Components | Movement Rate (Q) | Cái đầu (H) mét |
Tốc độ (RPM) |
Đường kính cánh quạt. (mm) |
|
| m³/giờ | l/s | |||||||
| 25HS-B | 15 | one.5/1 | M | 12.6~28.8 | three.five~eight | sáu~68 | 1200~3800 | 152 |
| R | ten.8~25.two | 3~7 | 7~năm mươi hai | 1400~3400 | 152 | |||
| 40HS-B | mười lăm | two/1.five | M | 32,4~bảy mươi hai | 9~hai mươi | sáu~58 | 1200~3200 | 184 |
| R | twenty five.2~fifty four | seven~fifteen | 5,541 | một nghìn ~ 2600 | 178 | |||
| 50HS-C | 30 | 3/hai | M | 39,6~86,4 | mười một~24 | mười hai~64 | 1300~2700 | 214 |
| R | 36~75.6 | mười~21 | mười ba~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~fifty five | 9~52 | một nghìn ~ 2200 | 245 |
| R | seventy nine.two~a hundred and eighty | 22~50 | năm~34,5 | 800~1800 | 245 | |||
| 100HS-D | sáu mươi | sáu/4 | M | 162~360 | bốn mươi~100 | twelve~56 | 800~1550 | 365 |
| R | 144~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | một trăm hai mươi | eight/6 | M | 360~828 | một trăm ~ 230 | 10-sáu mươi mốt | 500~1140 | 510 |
| R | 324~720 | 90~200 | 7~bốn mươi chín | bốn trăm ~ 1000 | 510 | |||
| 200MS-E | một trăm hai mươi | 10/8 | M | 666~1440 | 185~bốn trăm | mười bốn đến sáu mươi | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | một trăm bảy mươi~380 | mười một~61 | 400~850 | 686 |
| R | 540~1188 | một trăm năm mươi~330 | mười hai~50 | bốn trăm ~ 750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | bảy~68 | ba trăm ~ 800 | 762 |
| R | 720~1620 | hai trăm ~ 450 | 7~45 | ba trăm ~ 650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | mười ba~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~700 | mười ba đến bốn mươi bốn | 300~năm trăm | 965 | |||
| 350HS-TU | 1200 | mười sáu/mười bốn | M | 1368~3060 | 380~850 | mười một đến sáu mươi ba | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | bảy trăm ~ 1500 | 13~57 | two hundred~four hundred | 1370 |
| 25HHS-C | 30 | one.5/1 | M | 16.two~34.2 | 4.5~9.five | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/hai | M | 68.4~136.eight | 19~38 | hai mươi lăm~87 | 850~1400 | 457 |
| 75HHS-E | một trăm hai mươi | bốn/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | một trăm hai mươi | 6/bốn | M | 324~720 | ninety~two hundred | ba mươi~118 | 600~một nghìn | 711 |
| 150HHS-S | 560 | tám/sáu | M | 468-1008 | một trăm ba mươi~280 | 20~94 | 500~1000 | 711 |
For the content of putting on areas,
“M” = thép, hợp kim crom siêu bền “R” = cao su chống mài mòn
Liên hệ
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt interest and response !
