介绍：
1. HS series slurry pump is made for the ongoing pumping of higher abrasive, substantial density slurries with minimum upkeep specifications. The donning areas are made of ultra chrome or and rubber. It will keep high effectiveness above the use existence of its elements.
two. The metal moist elements and rubber kinds can be interchangeable for managing various liquids or slurries.
3. HS slurry pumps are offered in dimensions ranging from 1 inch to 18 inch discharge and attribute large efficiency performance able of stream prices from ten.eight to 5400 m³/h and heads up to one hundred twenty five meters for large head versions.
属性：
1. Cylindrical structure of bearing assembly: convenient to alter the room among impeller and entrance liner
可以完全移除
two. Interchangeable anti-abrasive moist elements made of higher-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs offer high operating strain capabilities
and an additional evaluate of safety.
4. The discharge department can be oriented to any 8 positions at the interval of 45 degrees
five. A variety of drive kinds: DC(immediate relationship), V-belt generate, equipment box reducer, hydraulic couplings, VFD,
SCR管理等
six. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Normal Software:
| • CZPT | • CZPT处理 | • 煤炭准备 | • 旋风输送 |
| • 隧道 | • CZPT浆料 | • 尾矿 | • 磨机研磨 |
| • 灰烬处理 | • 造纸和纸浆 | • 废弃污泥 | • 粗砂 |
| • 石灰泥 | 磷酸 | • 疏浚 | • CZPT |
| • 氧化铝 CZPT | • 发电厂 | •钾肥厂 | 其他行业 |
| 设计 | 最大电力 （Kw） |
进出水口尺寸（英寸） | Material for Put on Elements | Stream Charge (Q) | 头 （H） 仪表 |
步伐 （转速） |
叶轮直径 （毫米） |
|
| 立方米/小时 | 升/秒 | |||||||
| 25HS-B | 十五 | 1.五/一 | M | 12.6~28.8 | 3.5~8 | six~sixty eight | 1200~3800 | 152 |
| 拉 | 10.8~25.two | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 二/一.五 | M | 32.4~72 | 九点二十分 | 6~fifty eight | 1200~3200 | 184 |
| 拉 | twenty five.2~54 | 7~15 | 5.five~41 | 1000~2600 | 178 | |||
| 50HS-C | 30 | 三/二 | M | 39.6~86.4 | 11~24 | 十二~64 | 1300~2700 | 214 |
| 拉 | 36~75.6 | 10~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 三十 | 四/三 | M | 86.four~198 | 24~55 | 9~52 | 一千~2200 | 245 |
| 拉 | 七十九.2~一百八十 | 22~50 | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 四千一百 | twelve~56 | 800~1550 | 365 |
| 拉 | 一百四十四~324 | 40~90 | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | 一百二十 | 八/六 | M | 360~828 | 一百~230 | 10~61 | 五百~1140 | 510 |
| 拉 | 324~720 | 90~200 | 7~49 | four hundred~a thousand | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | 十四~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 一百七十~380 | 11~61 | 四百~850 | 686 |
| 拉 | 540~1188 | 一百五十~330 | 十二~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | seven~sixty eight | 三百~800 | 762 |
| 拉 | 720~1620 | 二百~450 | 7~45 | 三百~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13~63 | 三百~600 | 965 |
| 拉 | 1152~2520 | 320~700 | 十三至四十四 | 三百~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 十一点六十三分 | 250~550 | 1067 |
| 450HS-TU | 1200 | 二十/18 | M | 2520~5400 | 700~1500 | 13~57 | 200~400 | 1370 |
| 25HHS-C | 三十 | 1.5/1 | M | sixteen.2~34.two | 4.5~9.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 三/二 | M | sixty eight.four~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | 一百二十 | 6/4 | M | 324~720 | 九十~200 | 30~118 | 600~一千 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | 2094年 | 五百~一千 | 711 |
For the material of putting on areas,
“M” = metal, ultra chromium alloy “R” = anti-abrasive rubber
联系
欢迎随时与我们联系以获取信息。
Your inquiry will get our prompt focus and response !
