Описание на продукта
Параметри на продукта
HYDR-STAR AGB06-1D-4 8-100 Mpa Output Portable Double Acting CZPT Pressure CZPT Gas Piston Pump
| Елемент | Стойност |
| Модел № | AGB06-1D-4 |
| Максимално налягане | 86 bar |
| Actual ML per cycle | 316 ML |
| Среден | Suitable for most gases, such as CZPT gen, CZPT um, Nitrogen and CZPT Gas and so on.
Industrial gases like Argon, CZPT um and Nitrogen can be compressed to operating pressures of 25000 psig (1724 bar ),Oxygen to 5000 psig (345 bar), CZPT gen to 15000 psig bar (1034 bar). CZPT er outlet pressure to 1035 bar(15000 psig) |
| Приложение | ★Pressure test & leakage test with gas ★Gas transfer ★Charging of nitrogen accumulators ★Supply for isolating gas systems ★Gas assisted injection moulding ★CO2 foaming ★Transfer of oxygen cylinders ★Life Support Gas Transfer and Charging ★Gas recovery: Pressurize the remaining lower pressure gases in the cylinder or pipeline and fill the gases into a cylinder. ★Compressed CZPT Gas (CNG) Boosting for vehicle refueling stations. ★Hydrogen refueling station compresses hydrogen for fuel cell. |
| Гаранция | 1 година |
Описание на продукта
Air CZPT n Gas Boosters
HYDR-STAR Gas Boosters consist of a large area reciprocating air drive piston directly coupled by a connecting rod to a small area gas piston. The gas piston operates in a high pressure gas barrel section. Each gas barrel end cap contains high pressure inlet and outlet check valves. Varying applications require many different booster and air drive head combinations.
The air drive section includes a cycling spool and pilot valves that provide continuous reciprocating action when air is supplied to the air drive inlet. The ratio between the area of the air drive piston and the gas driven piston is indicated by the number in the model description and approximates the maximum pressure the gas booster is capable of generating.
Technical specifications
There are two distinct sections: the air drive section and the gas barrel section.
Air CZPT Section
Standard Air CZPT Seals should perform reliably within a temperature range of (25°F to 150°F) (-4°C to 65°C). Lower temperatures will cause air/gas leakage; higher temperatures reduce seal life.
HYDR-STAR recommends a minimum Class 4 air quality per ISO 8573.1 standards. For operation at extremely low temperatures, consult factory.
Gas Barrel Section
Low temperatures normally have little effect on the operation of standard parts and seals. The heat from the compressing gas helps to balance out an acceptable temperature. CZPT imum average acceptable temperature 115°C (240°F). Generally, the built-in cooling adopts exhaust air cooling. That can keep the temperature not exceeding this value. Also cooling by water is CZPT as an option.
Suction pressures lower than the indicated “Ps min” are not permitted and can cause damages on the unit. Because each booster has a fixed maximum compression ratio. When the air supply pressure is too low, the gas can not be pressurized to a certain pressure in the high-pressure barrel, causing the booster to reciprocate and fail to output gas.The gas will be compressed and released repeatedly in the high-pressure barrel.
Stroke frequency
The maximum stroke frequency is at 100 cycles per minute for 50% duty cycle, It is recommended not to exceed 60 cycles/min for CZPT -term operation or heavy-duty applications.
Air CZPT n Gas Booster Configurations
HYDR-STAR air driven gas boosters have wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities. Single acting, single stage boosters are the base model. Double acting, single stage provides twice the delivery of a single acting single stage booster. Two stage models are used for high gas compression ratios.
Характеристики на продукта
★ CZPT ble, easy to maintain, compact and robust.
★ No heat, flame or spark risk.
★ Infinitely variable cycling speed and output.
★ Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion proof areas.
★ Easy to apply automatic controls.
★ No limit or adverse affect to continuous stop/start applications.
★ Seal systems designed for CZPT working life.
★ No airline lubricator required.
★ Separation between air and gas sections.
★ Built-in cooling.
★ Ability to stall at any predetermined pressure and hold the fixed pressure without consuming CZPT or generating heat.
★ ATEX approved,CE certified.
★ There is no lubrication in the gas section. It will not pollute the gas and ensure the high purity of the gas.
★ The gas supply can be used to extremely low pressure, which improves the gas utilization.
Нашите предимства
Easy handling
1. Initial operation
The pump is prepared for operation manually:
☆ Connect supply lines (compressed air, suction and pressure lines).
☆ Set air drive pressure.
☆ Open compressed air supply slowly so that the high-pressure pump starts up .
2. Build up pressure
The pump technology executes all the steps for pressure build-up automatically:
☆ Automatic cycling of 4/2-way valve (spool cycling valve) by means of air pulses from the pilot valve (2/2-way valve)
☆ Suction of medium.
☆ Optimum cycling conditions thanks to large cross-sections .
3. Achieve and hold pressure
The pump controls the processes of reaching and holding pressure.
☆ Pump automatically stops operating when the operating pressure is reached due to equilibrium of forces
☆ Pressure is held.
☆ Pressure holding phase with no energy consumption or heat generation .
☆ Pump restarted automatically if operating pressure drops.
Профил на компанията
Създадена от технически екип с най-малко 15-годишен опит в технологиите за високо налягане и контрола на флуиди, HYDR-STAR CZPT Control Company Limited се счита за водещ производител в CZPT за пневматични задвижвани течни помпи и газови усилватели и клапани за високо налягане (до 100 000 psi). С нарастващото приемане от чуждестранни производители на CZPT за опита си в приложението на помпи и клапани, HYDR-STAR натрупва репутация сред едни от най-влиятелните играчи в чужбина.
За разлика от вездесъщите търговски компании, HYDR-STAR е типичен производител с автентична база, където офис сградата и модерният цех обхващат 30 000 кв. метра. Цехът е характерен с производствено оборудване CZPT d, безпрашно помещение за сглобяване, пълна гама от сложни машини за проверка на суровините и хидравлични и пневматични агрегати за функции и тестове на производителността на CZPT.
Сертификатите CE, TUV, SIL и ATEX са CZPT. В допълнение, HYDR-STAR е получила най-новия ISO9001:2015, издаден от SGS. Поддържаните от нас видове бизнес сътрудничество включват директна покупка, оторизация на агент/дистрибутор, CZPT услуга, ODM услуга и др. Заповядайте да се свържете с нас и да посетите фабриката на CZPT!
Сертификати
Оборудване и изложби
Опаковки и CZPT
Пяна вътре, картонена кутия / дървена кутия отвън
ЧЗВ
1. Кои сме ние?
Базирани сме в Джъдзян, CZPT, от 2013 г., продаваме на вътрешния пазар (15.00%), Средния CZPT (15.00%), Западния CZPT pe (15.00%), Източния CZPT pe (10.00%), Южния CZPT pe (10.00%), Северния CZPT pe (10.00%), Океания (5.00%), Южния CZPT ica (5.00%), Северния CZPT ica (5.00%), Южната Азия (5.00%), Югоизточна Азия (5.00%). В офиса на CZPT има общо около 51-100 души.
2. как можем да гарантираме качество?
Винаги предпроизводствена мостра преди масово производство;
Винаги последна проверка преди изпращане;
3. Какво можете да закупите от нас?
Пневматични помпи и усилватели за течности, високонапорни вентили и фитинги (неръждаема стомана), хидравлични CZPT агрегати, ръчни помпи, електрически помпи
4. Защо трябва да купувате от нас, а не от други доставчици?
HYDR-STAR притежава екип от CZPT с над 15 години опит в областта на изпитванията под високо налягане и технологиите за контрол на флуиди, с богато ноу-хау в научноизследователската и развойна дейност, както и силен капацитет за проектиране на нови продукти и решения.
5. какви услуги можем да предоставим?
Приети условия за доставка: FOB, EXW;
Приета валута на плащане: USD, EUR, CNY;
Приет вид плащане: T/T;
Говорим език: английски, китайски
