Introduction:
one. HS series slurry pump is created for the continuous pumping of high abrasive, large density slurries with minimal routine maintenance specifications. The sporting areas are created of ultra chrome or and rubber. It will preserve higher efficiency in excess of the put on lifestyle of its components.
two. The metal moist components and rubber ones can be interchangeable for dealing with different liquids or slurries.
three. HS slurry pumps are available in dimensions ranging from 1 inch to 18 inch discharge and feature higher effectiveness functionality able of flow charges from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for large head models.
Functions:
one. Cylindrical construction of bearing assembly: convenient to modify the space between impeller and entrance liner
and can beremoved completely
two. Interchangeable anti-abrasive damp components manufactured of higher-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs offer high running strain abilities
and an added measure of basic safety.
4. The discharge department can be oriented to any 8 positions at the interval of 45 levels
5. Different drive varieties: DC(immediate link), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
SCR management, and so forth
6. The shaft seal utilizes the packing seal, expeller seal and mechanical seal
Normal Application:
| • CZPT processing | • CZPT | • Coal Washery | • Cyclone feeds |
| • Bentonite | • CZPT slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • CZPT |
| • Alumina CZPT | • Electrical power Plant | • Potash Fertilizer Plant | • Other industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Design | Max Energy (Kw) |
Inlet & Outlet dimension (inch) | Substance for Put on Areas | Flow Fee (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | fifteen | one.5/one | M | 12.six~28.eight | 3.5~8 | 6~sixty eight | 1200~3800 | 152 |
| R | 10.eight~twenty five.two | three~seven | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.5 | M | 32.four~seventy two | 9~20 | six~fifty eight | 1200~3200 | 184 |
| R | 25.2~fifty four | 7~fifteen | five.5~forty one | one thousand~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6~86.four | eleven~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~75.six | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/three | M | 86.four~198 | 24~55 | 9~fifty two | a thousand~2200 | 245 |
| R | seventy nine.2~180 | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | six/four | M | 162~360 | 40~100 | twelve~fifty six | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | one hundred twenty | 8/6 | M | 360~828 | one hundred~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | 90~200 | seven~forty nine | 400~1000 | 510 | |||
| 200MS-E | 120 | ten/eight | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | one hundred seventy~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | twelve~fifty | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | 13~57 | 200~four hundred | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | sixteen.2~34.two | 4.five~9.5 | 25~ninety two | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | sixty eight.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | six/four | M | 324~720 | 90~two hundred | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | one hundred thirty~280 | 20~ninety four | 500~one thousand | 711 |
For the materials of putting on areas,
“M” = metal, ultra chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to speak to us any time for particulars.
Your inquiry will get our prompt consideration and response !
