導入：
one. HS series slurry pump is created for the continuous pumping of high abrasive, large density slurries with minimal routine maintenance specifications. The sporting areas are created of ultra chrome or and rubber. It will preserve higher efficiency in excess of the put on lifestyle of its components.
two. The metal moist components and rubber ones can be interchangeable for dealing with different liquids or slurries.
three. HS slurry pumps are available in dimensions ranging from 1 inch to 18 inch discharge and feature higher effectiveness functionality able of flow charges from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for large head models.
機能:
one. Cylindrical construction of bearing assembly: convenient to modify the space between impeller and entrance liner
完全に除去できる
two. Interchangeable anti-abrasive damp components manufactured of higher-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs offer high running strain abilities
and an added measure of basic safety.
4. The discharge department can be oriented to any 8 positions at the interval of 45 levels
5. Different drive varieties: DC(immediate link), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
SCR management, and so forth
6. シャフトシールは、パッキンシール、エクスぺラーシール、およびメカニカルシールを利用する。
Normal Application:
| • CZPT処理 | • CZPT | • 石炭 洗濯場 | • サイクロンフィード |
| • Bエントナイト | • CZPTスラーy | • 尾鉱 | • ミル粉砕 |
| • 灰の手渡し | • トンネル | • 廃汚泥 | • 粗い砂 |
| • 石灰泥 | • リン酸 | • 浚渫 | • CZPT |
| • アルミナCZPT | • 発電所 | • カリ肥料工場 | • その他の産業 |
| • 鉄鉱石砂 | • 銅濃度 | • 金鉱 | •モリブデン |
| デザイン | 最大エネルギー （クォン） |
入口・出口寸法（インチ） | 着用部位用物質 | Flow Fee (Q) | 頭 （H） メートル |
速度 （回転数） |
インペラ径 （ミリメートル） |
|
| m³/時 | l/s | |||||||
| 25HS-B | 15 | one.5/one | M | 12.6～28.8 | 3.5~8 | 6～68 | 1200~3800 | 152 |
| R | 10.eight~twenty five.two | 3〜7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/1.5 | M | 32.472 | 9~20 | 6～58 | 1200~3200 | 184 |
| R | 25.2~fifty four | 7〜15 | five.5~forty one | 1000～2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6～86.4 | 11～24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36〜75.6 | 10～21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.4~198 | 24~55 | 9〜52 | 千～2200 | 245 |
| R | seventy nine.2~180 | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40~100 | 12時56分 | 800~1550 | 365 |
| R | 144〜324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/6 | M | 360~828 | 100〜230 | 10～61 | 500~1140 | 510 |
| R | 324~720 | 90~200 | 7～49 | 400~1000 | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185~400 | 14～60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170～380 | 11～61 | 400～850 | 686 |
| R | 540~1188 | 150〜330 | 12～50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
| R | 720~1620 | 200〜450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
| R | 1152~2520 | 320~700 | 13～44 | 300～500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11～63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | 13~57 | 200～400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | 16.2～34.2 | 4.five~9.5 | 25～92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | sixty eight.4~136.eight | 19~38 | 25～87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12～97 | 600~1400 | 508 |
| 100HHS-E | 120 | 6/4 | M | 324~720 | 90～200 | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130～280 | 20～94年 | 500～1000 | 711 |
For the materials of putting on areas,
「M」＝金属、超クロム合金 「R」＝耐摩耗性ゴム
話す
Welcome to speak to us any time for particulars.
お客様からのお問い合わせには迅速に対応させていただきます！
