導入：
one. HS series slurry pump is designed for the steady pumping of large abrasive, large density slurries with minimum upkeep demands. The wearing components are made of extremely chrome or and rubber. It will keep substantial effectiveness more than the put on lifestyle of its elements.
2. The steel soaked elements and rubber ones can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are accessible in sizes ranging from one inch to 18 inch discharge and feature large performance performance able of stream prices from 10.eight to 5400 m³/h and heads up to 125 meters for higher head designs.
特徴：
one. Cylindrical composition of bearing assembly: hassle-free to adjust the room among impeller and front liner
完全に除去できます
2. Interchangeable anti-abrasive damp elements produced of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher functioning force abilities
and an extra evaluate of protection.
4. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different generate varieties: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR management, etc
６．シャフトシールには、パッキンシール、エクスぺラーシール、メカニカルシールが用いられる。
Typical Software:
| • CZPT処理 | • CZPT | • 石炭 洗濯場 | • サイクロンフィード |
| • Bエントナイト | • CZPTスラーy | • 尾鉱 | • ミル粉砕 |
| • 灰の手渡し | • トンネル | • 廃汚泥 | • 粗い砂 |
| • 石灰泥 | • リン酸 | • 浚渫 | • CZPT |
| • アルミナCZPT | ・発電所 | • カリ肥料工場 | • その他の産業 |
| • 鉄鉱石砂 | • 銅フォーカス | • 金鉱 | •モリブデン |
| モデル | 最大電力 （クォン） |
入口・出口寸法（インチ） | Material for Put on Components | Movement Rate (Q) | 頭 （H） メートル |
スピード （回転数） |
インペラ径 （ミリメートル） |
|
| m³/時 | l/s | |||||||
| 25HS-B | 15 | 1.5/1 | M | 12.6~28.8 | three.five~eight | 6～68 | 1200~3800 | 152 |
| R | ten.8~25.two | 3~7 | 7～52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.five | M | 32.4～72 | 9〜20 | 6〜58 | 1200~3200 | 184 |
| R | 25.2～54 | seven~fifteen | 5.5～41 | 1000～2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6～86.4 | 11～24 | 12～64 | 1300~2700 | 214 |
| R | 36~75.6 | 10～21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24～55 | 9~52 | 1000～2200 | 245 |
| R | seventy nine.two~a hundred and eighty | 22~50 | 5～34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | 40～100 | 12～56 | 800~1550 | 365 |
| R | 144~324 | 40～90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/6 | M | 360~828 | 百～230 | 10~sixty one | 500~1140 | 510 |
| R | 324~720 | 90~200 | 7～49 | 400〜1000 | 510 | |||
| 200MS-E | 120 | 10/8 | M | 666~1440 | 185～400 | 14～60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 170～380 | 11～61 | 400~850 | 686 |
| R | 540~1188 | 150〜330 | 12～50 | 400〜750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7～68 | 300～800 | 762 |
| R | 720~1620 | 200〜450 | 7~45 | 300～650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 13～63 | 300～600 | 965 |
| R | 1152~2520 | 320~700 | 13～44 | 300～500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11～63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700～1500 | 13~57 | 200～400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | 16.two~34.2 | 4.5～9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | 68.4~136.eight | 19~38 | 25～87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | 12～97 | 600~1400 | 508 |
| 100HHS-E | 120 | 6/4 | M | 324~720 | 9200 | 30～118 | 600～1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130～280 | 20~94 | 500~1000 | 711 |
For the content of putting on areas,
「M」＝鋼鉄、超クロム合金「R」＝耐摩耗性ゴム
接触
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt interest and response !
