介绍：
one. HS series slurry pump is designed for the steady pumping of large abrasive, large density slurries with minimum upkeep demands. The wearing components are made of extremely chrome or and rubber. It will keep substantial effectiveness more than the put on lifestyle of its elements.
2. The steel soaked elements and rubber ones can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are accessible in sizes ranging from one inch to 18 inch discharge and feature large performance performance able of stream prices from 10.eight to 5400 m³/h and heads up to 125 meters for higher head designs.
特征：
one. Cylindrical composition of bearing assembly: hassle-free to adjust the room among impeller and front liner
可以完全移除
2. Interchangeable anti-abrasive damp elements produced of large-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs offer higher functioning force abilities
and an extra evaluate of protection.
4. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different generate varieties: DC(direct connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
SCR management, etc
six. The shaft seal employs the packing seal, expeller seal and mechanical seal
Typical Software:
| • CZPT处理 | • CZPT | 煤炭 洗衣店 | • 旋风输送 |
| • B膨润土 | • CZPT 污泥是 | • 尾矿 | • 磨机研磨 |
| • 灰烬处理 | • 隧道 | • 废弃污泥 | • 粗砂 |
| • 石灰泥 | 磷酸 | • 疏浚 | • CZPT |
| • 氧化铝 CZPT | • 发电厂 | •钾肥厂 | 其他行业 |
| • 铁矿砂 | • 铜焦点 | • 金矿 | •钼 |
| 模型 | 最大电力 （Kw） |
进出水口尺寸（英寸） | Material for Put on Components | Movement Rate (Q) | 头 （H） 仪表 |
速度 （转速） |
叶轮直径 （毫米） |
|
| 立方米/小时 | 升/秒 | |||||||
| 25HS-B | 15 | 1.5/1 | M | 12.6~28.8 | 三.5~八 | 六~68 | 1200~3800 | 152 |
| 拉 | ten.8~25.two | 3~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 十五 | two/1.five | M | 32.4~72 | 9~20 | 六~58 | 1200~3200 | 184 |
| 拉 | 二十五.2~五十四 | seven~fifteen | 5.5~41 | 一千~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6~86.4 | 十一~24 | twelve~64 | 1300~2700 | 214 |
| 拉 | 36~75.6 | 十~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~55 | 9~52 | 一千~2200 | 245 |
| 拉 | seventy nine.two~a hundred and eighty | 22~50 | 五~34.5 | 800~1800 | 245 | |||
| 100HS-D | 六十 | 六/4 | M | 162~360 | 四十~100 | twelve~56 | 800~1550 | 365 |
| 拉 | 144~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 一百二十 | 八/6 | M | 360~828 | 一百~230 | 10~61 | 500~1140 | 510 |
| 拉 | 324~720 | 90~200 | 7~49 | 四百~1000 | 510 | |||
| 200MS-E | 一百二十 | 10/8 | M | 666~1440 | 185~400 | 十四~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | 一百七十~380 | 十一~61 | 400~850 | 686 |
| 拉 | 540~1188 | 一百五十~330 | 十二~50 | 四百~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 七~68 | 三百~800 | 762 |
| 拉 | 720~1620 | two hundred~450 | 7~45 | 三百~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | 十三~63 | 三百~600 | 965 |
| 拉 | 1152~2520 | 320~700 | 十三至四十四 | 300~500 | 965 | |||
| 350HS-TU | 1200 | 十六/十四 | M | 1368~3060 | 380~850 | 十一点六十三分 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | 七百~1500 | 13~57 | 二百四百 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | 16.2~34.2 | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | 68.4~136.eight | 19~38 | 二十五~87 | 850~1400 | 457 |
| 75HHS-E | 一百二十 | 四/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | 一百二十 | 6/4 | M | 324~720 | ninety~two hundred | 三十~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 八/六 | M | 468-1008 | 一百三十~280 | 20~94 | 500~1000 | 711 |
For the content of putting on areas,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
接触
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt interest and response !
