介绍：
one. HS series slurry pump is created for the continuous pumping of high abrasive, large density slurries with minimal routine maintenance specifications. The sporting areas are created of ultra chrome or and rubber. It will preserve higher efficiency in excess of the put on lifestyle of its components.
two. The metal moist components and rubber ones can be interchangeable for dealing with different liquids or slurries.
three. HS slurry pumps are available in dimensions ranging from 1 inch to 18 inch discharge and feature higher effectiveness functionality able of flow charges from 10.8 to 5400 m³/h and heads up to a hundred twenty five meters for large head models.
功能：
one. Cylindrical construction of bearing assembly: convenient to modify the space between impeller and entrance liner
并且可以完全移除
two. Interchangeable anti-abrasive damp components manufactured of higher-chrome alloys
three. Casing halves of ductile iron with exterior reinforcing ribs offer high running strain abilities
and an added measure of basic safety.
4. The discharge department can be oriented to any 8 positions at the interval of 45 levels
5. Different drive varieties: DC(immediate link), V-belt drive, equipment box reducer, hydraulic couplings, VFD,
SCR management, and so forth
6. 轴封采用填料密封、涡流密封和机械密封。
正常应用：
| • CZPT处理 | • CZPT | 煤炭 洗衣店 | • 旋风输送 |
| • B膨润土 | • CZPT 污泥是 | • 尾矿 | • 磨机研磨 |
| • 灰烬处理 | • 隧道 | • 废弃污泥 | • 粗砂 |
| • 石灰泥 | 磷酸 | • 疏浚 | • CZPT |
| • 氧化铝 CZPT | • 发电厂 | •钾肥厂 | 其他行业 |
| • 铁矿砂 | • 铜浓度 | • 金矿 | •钼 |
| 设计 | 最大能量 （Kw） |
进出水口尺寸（英寸） | 适用于穿戴区域的物质 | Flow Fee (Q) | 头 （H） 仪表 |
速度 （转速） |
叶轮直径 （毫米） |
|
| 立方米/小时 | 升/秒 | |||||||
| 25HS-B | 十五 | one.5/one | M | 12.six~28.eight | 3.5~8 | 6~68 | 1200~3800 | 152 |
| 拉 | 10.eight~twenty five.two | 三至七 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | 二/1.5 | M | 32.4~72 | 9~20 | 六点五十八分 | 1200~3200 | 184 |
| 拉 | 25.2~fifty four | 7~15 | five.5~forty one | 一千~2600 | 178 | |||
| 50HS-C | 30 | 3/2 | M | 39.6~86.4 | 十一~24 | twelve~sixty four | 1300~2700 | 214 |
| 拉 | 36~75.6 | 十~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | 三十 | 4/three | M | 86.four~198 | 24~55 | 9~52 | 一千~2200 | 245 |
| 拉 | seventy nine.2~180 | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 六/四 | M | 162~360 | 40~100 | 十二点五十六分 | 800~1550 | 365 |
| 拉 | 一百四十四~324 | 40~90 | 12~45 | 800~1350 | 365 | |||
| 150HS-E | 一百二十 | 8/6 | M | 360~828 | 一百~230 | 十~六十一 | 五百~1140 | 510 |
| 拉 | 324~720 | 90~200 | 七四十九 | 400~1000 | 510 | |||
| 200MS-E | 120 | 十/八 | M | 666~1440 | 185~400 | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/8 | M | 612~1368 | 一百七十~380 | 十一~61 | 四百~850 | 686 |
| 拉 | 540~1188 | 一百五十~330 | 十二点五十 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/十 | M | 936~1980 | 260~550 | 7~68 | 300~800 | 762 |
| 拉 | 720~1620 | 二百~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
| 拉 | 1152~2520 | 320~700 | 十三至四十四 | 300~500 | 965 | |||
| 350HS-TU | 1200 | 十六/十四 | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | 700~1500 | 13~57 | 200~400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | sixteen.2~34.two | 4.five~9.5 | 25~92 | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | 68.4~136.8 | 19~38 | 二十五~87 | 850~1400 | 457 |
| 75HHS-E | 一百二十 | 四/三 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | 一百二十 | 六/四 | M | 324~720 | 90~200 | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 一百三十~280 | 2094年 | 500~1000 | 711 |
For the materials of putting on areas,
“M” = metal, ultra chromium alloy “R” = anti-abrasive rubber
与……交谈
Welcome to speak to us any time for particulars.
您的咨询将得到我们的及时关注和回复！
