Descripción del Producto
Parámetros del producto
HYDR-STAR AGB06-1D-4 8-100 Mpa Output Portable Double Acting CZPT Pressure CZPT Gas Piston Pump
| Artículo | Valor |
| Modelo NO. | AGB06-1D-4 |
| Presión máxima | 86 bar |
| Actual ML per cycle | 316 ML |
| Medio | Suitable for most gases, such as CZPT gen, CZPT um, Nitrogen and CZPT Gas and so on.
Industrial gases like Argon, CZPT um and Nitrogen can be compressed to operating pressures of 25000 psig (1724 bar ),Oxygen to 5000 psig (345 bar), CZPT gen to 15000 psig bar (1034 bar). CZPT er outlet pressure to 1035 bar(15000 psig) |
| Solicitud | ★Pressure test & leakage test with gas ★Gas transfer ★Charging of nitrogen accumulators ★Supply for isolating gas systems ★Gas assisted injection moulding ★CO2 foaming ★Transfer of oxygen cylinders ★Life Support Gas Transfer and Charging ★Gas recovery: Pressurize the remaining lower pressure gases in the cylinder or pipeline and fill the gases into a cylinder. ★Compressed CZPT Gas (CNG) Boosting for vehicle refueling stations. ★Hydrogen refueling station compresses hydrogen for fuel cell. |
| Garantía | 1 año |
Descripción del Producto
Air CZPT n Gas Boosters
HYDR-STAR Gas Boosters consist of a large area reciprocating air drive piston directly coupled by a connecting rod to a small area gas piston. The gas piston operates in a high pressure gas barrel section. Each gas barrel end cap contains high pressure inlet and outlet check valves. Varying applications require many different booster and air drive head combinations.
The air drive section includes a cycling spool and pilot valves that provide continuous reciprocating action when air is supplied to the air drive inlet. The ratio between the area of the air drive piston and the gas driven piston is indicated by the number in the model description and approximates the maximum pressure the gas booster is capable of generating.
Technical specifications
There are two distinct sections: the air drive section and the gas barrel section.
Air CZPT Section
Standard Air CZPT Seals should perform reliably within a temperature range of (25°F to 150°F) (-4°C to 65°C). Lower temperatures will cause air/gas leakage; higher temperatures reduce seal life.
HYDR-STAR recommends a minimum Class 4 air quality per ISO 8573.1 standards. For operation at extremely low temperatures, consult factory.
Gas Barrel Section
Low temperatures normally have little effect on the operation of standard parts and seals. The heat from the compressing gas helps to balance out an acceptable temperature. CZPT imum average acceptable temperature 115°C (240°F). Generally, the built-in cooling adopts exhaust air cooling. That can keep the temperature not exceeding this value. Also cooling by water is CZPT as an option.
Suction pressures lower than the indicated “Ps min” are not permitted and can cause damages on the unit. Because each booster has a fixed maximum compression ratio. When the air supply pressure is too low, the gas can not be pressurized to a certain pressure in the high-pressure barrel, causing the booster to reciprocate and fail to output gas.The gas will be compressed and released repeatedly in the high-pressure barrel.
Stroke frequency
The maximum stroke frequency is at 100 cycles per minute for 50% duty cycle, It is recommended not to exceed 60 cycles/min for CZPT -term operation or heavy-duty applications.
Air CZPT n Gas Booster Configurations
HYDR-STAR air driven gas boosters have wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities. Single acting, single stage boosters are the base model. Double acting, single stage provides twice the delivery of a single acting single stage booster. Two stage models are used for high gas compression ratios.
Características del producto
★ CZPT ble, easy to maintain, compact and robust.
★ No heat, flame or spark risk.
★ Infinitely variable cycling speed and output.
★ Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion proof areas.
★ Easy to apply automatic controls.
★ No limit or adverse affect to continuous stop/start applications.
★ Seal systems designed for CZPT working life.
★ No airline lubricator required.
★ Separation between air and gas sections.
★ Built-in cooling.
★ Ability to stall at any predetermined pressure and hold the fixed pressure without consuming CZPT or generating heat.
★ ATEX approved,CE certified.
★ There is no lubrication in the gas section. It will not pollute the gas and ensure the high purity of the gas.
★ The gas supply can be used to extremely low pressure, which improves the gas utilization.
Nuestras ventajas
Easy handling
1. Initial operation
The pump is prepared for operation manually:
☆ Connect supply lines (compressed air, suction and pressure lines).
☆ Set air drive pressure.
☆ Open compressed air supply slowly so that the high-pressure pump starts up .
2. Build up pressure
The pump technology executes all the steps for pressure build-up automatically:
☆ Automatic cycling of 4/2-way valve (spool cycling valve) by means of air pulses from the pilot valve (2/2-way valve)
☆ Suction of medium.
☆ Optimum cycling conditions thanks to large cross-sections .
3. Achieve and hold pressure
The pump controls the processes of reaching and holding pressure.
☆ Pump automatically stops operating when the operating pressure is reached due to equilibrium of forces
☆ Pressure is held.
☆ Pressure holding phase with no energy consumption or heat generation .
☆ Pump restarted automatically if operating pressure drops.
Perfil de la empresa
Formada por un equipo técnico con al menos 15 años de experiencia en tecnología de alta presión y control de fluidos, HYDR-STAR CZPT Control Company Limited se ha consolidado como el fabricante líder de CZPT para bombas de líquido y amplificadores de gas de accionamiento neumático, así como válvulas de alta presión (hasta 100 000 psi). Gracias a la creciente aceptación de los fabricantes extranjeros de CZPT por su experiencia en aplicaciones de bombas y válvulas, HYDR-STAR se está consolidando entre algunas de las empresas más influyentes del mundo.
A diferencia de las omnipresentes empresas comerciales, HYDR-STAR es típicamente un fabricante con una sede establecida, donde el edificio de oficinas y el moderno taller ocupan 30.000 m². El taller cuenta con equipos de fabricación CZPT d, una sala de montaje nivelada y libre de polvo, una gama completa de máquinas sofisticadas para la inspección de materias primas y unidades hidráulicas y neumáticas para las funciones CZPT y las pruebas de rendimiento.
Los certificados CE, TÜV, SIL y ATEX son de CZPT. Además, HYDR-STAR cuenta con la última certificación ISO9001:2015, emitida por SGS. Ofrecemos cooperación comercial mediante compra directa, autorización de agente/distribuidor, servicio CZPT, servicio ODM, etc. ¡Le invitamos a contactarnos y visitar la fábrica de CZPT!
Certificaciones
Equipamiento y Exposiciones
Embalaje y CZPT
Espuma en el interior, caja de cartón/caja de madera en el exterior
Preguntas frecuentes
1. ¿Quiénes somos?
Estamos ubicados en ZheJiang, CZPT, a partir de 2013, vendemos al mercado nacional (15.00%), CZPT medio (15.00%), CZPT occidental pe (15.00%), CZPT oriental pe (10.00%), CZPT meridional pe (10.00%), CZPT septentrional pe (10.00%), Oceanía (5.00%), CZPT meridional ica (5.00%), CZPT septentrional ica (5.00%), Asia meridional (5.00%), Sudeste asiático (5.00%). Hay un total de 51-100 personas en la oficina de CZPT.
2. ¿Cómo podemos garantizar la calidad?
Siempre una muestra de preproducción antes de la producción en masa;
Siempre inspección final antes del envío;
3.¿Qué puedes comprar con nosotros?
Bombas y amplificadores de líquidos accionados por aire, válvulas y accesorios de alta presión (acero inoxidable), unidades hidráulicas CZPT, bombas manuales, bombas eléctricas
4. ¿Por qué debería comprar con nosotros y no con otros proveedores?
HYDR-STAR cuenta con un equipo CZPT con más de 15 años de experiencia en el campo de pruebas de alta presión y tecnología de control de fluidos, con amplios conocimientos en I+D y una fuerte capacidad de diseño de nuevos productos y soluciones.
5. ¿Qué servicios podemos ofrecer?
Condiciones de entrega aceptadas: FOB,EXW;
Moneda de pago aceptada: USD, EUR, CNY;
Tipo de pago aceptado: T/T;
Idioma hablado: inglés, chino
