Usun Model: GBT30 60 Double Stage Pneumatic Gas Pressure Test Pump for Leakage Testing

Usun Model: GBT30 60 Double Stage Pneumatic Gas Pressure Test Pump for Leakage Testing

 CZPT Design :GBT30/60  double stage  pneumatic gasoline force take a look at pump  for leakage testing  

 

ซีซีพีที air driven fuel booster  ปั๊ม are ratio devices that utilize minimal pressure compressed

 

air driving a greater diameter piston (spot x strain) which is linearly connected to a scaled-down

 

hydraulic piston/plunger. Using this ratio principal, a increased hydraulic force can be produced.

 

CZPT Pump design quantities reflect the pumps nominal pressure ratio, whilst the technical data 

 

signifies specific ratios.  The outlet stall stress is easy to established by modifying the air push pressure

 

by way of a easy air pressure regulator. By multiplying the stress ratio by the obtainable store

 

ความดันอากาศ สามารถคำนวณความเค้นของก๊าซตามที่กำหนดได้
 

ภาพประกอบ ( Pการออกแบบ ump: 15/40 ปอนด์สเตอร์ลิง เครื่องเพิ่มแรงดันแก๊ส ปั๊ม)

Air drive piston spot ( 16เส้นผ่านศูนย์กลาง 0 มม.)

CZPT plunger area ( twenty five(มม. Ø)

Actual ratio = forty:1

 one.  AIR Travel Section

The air drive section consists of a gentle excess weight piston total with seals operating inside of an

 

ถังอลูมิเนียม เส้นผ่านศูนย์กลางของลูกสูบอากาศคือ 160 มม. เมื่อจ่ายอากาศอัดเข้าไป

 

ปั๊มลมจะดันลูกสูบอากาศลงในจังหวะอัด

 

(forces as out of the gasoline conclude).

 

 Under the control of pilot pins (poppet valve) triggered at each stop of the stroke

 

two. GAS  Driven Segment

ส่วนประกอบก๊าซของเครื่องเพิ่มแรงดันก๊าซแบบใช้ลม CZPT ประกอบด้วยชิ้นส่วนหลัก 4 ชิ้น  

 

ถังแก๊ส ลูกสูบ วาล์วกันกลับ และซีลแรงดันสูงหลัก

 

ลูกสูบแก๊สเชื่อมต่อโดยตรงกับลูกสูบอากาศและติดตั้งอยู่ภายในถังแก๊ส 

 

และการเคลื่อนที่ขึ้นลงของมันทำให้เกิดการไหลของก๊าซเข้าและออกจากบูสเตอร์ผ่านทาง

 

 วาล์วกันกลับ วาล์วกันกลับเหล่านี้มีสปริงรับแรงดัน และในจังหวะดูด วาล์วตรวจสอบทางเข้า

 

opens to the greatest allowing fuel into the fuel barrel and on the compression stroke

 

the inlet verify valve closes the discharge verify valve opens forcing the pumped gas

 

 ในขั้นตอนการทำงาน ซีลแรงดันสูงหลักจะอยู่ที่ลูกสูบแก๊สและทำหน้าที่ปิดผนึกป้องกัน

 the gas barrel during operation . and the optimum pressures of the pump ,nevertheless the

 

CZPT PTFE seals are ideal for each the extensive majority of gases encountered .

 

สามารถจัดหาวัสดุก่อสร้างอื่นๆ เพื่อรองรับการใช้งานที่ต้องการประสิทธิภาพสูงขึ้นได้  

 

บูสเตอร์รุ่น CZPT ไม่เหมาะสำหรับการใช้งานในเหมืองถ่านหินใต้ดิน

 

CZPT DO CZPT models of  air pushed gas boosters  ทีหมวกไม่เหมาะสำหรับใช้ใต้ดิน

การใช้งานในเหมืองถ่านหิน

CZPT Air pushed gasoline boosters cycle routinely  as the outlet force increass the

 

แรงต้านจะเพิ่มขึ้นและอัตราการทำงานจะลดลงจนกระทั่งปั๊มหยุดทำงานโดยอัตโนมัติ 

 

เมื่อแรงดันขาออกเท่ากัน สภาวะนี้เรียกว่า สภาวะหยุดนิ่ง (stall condition)

 

ปั๊มจะเริ่มทำงานอีกครั้งเมื่อความดันขาออกลดลงเล็กน้อย หรือเมื่อความดันอากาศเพิ่มขึ้น 

ประสิทธิภาพของบูสเตอร์อาจได้รับผลกระทบจากหลายปัจจัย

 

เช่น การแข็งตัวของท่อไอเสียหรือวาล์วควบคุม (ซึ่งเกิดจากความชื้นภายใน)

 

 ท่ออากาศ, ขนาดท่ออากาศขาเข้าไม่เหมาะสม และไส้กรองสกปรก เมื่อใช้งานบูสเตอร์ 

 

ในการใช้งานต่อเนื่อง เราแนะนำให้คุณใช้รอบการทำงานสูงสุดที่ 50-60 รอบต่อนาที

 

วิธีนี้จะช่วยยืดระยะเวลาการบำรุงรักษาและช่วยป้องกันการเกิดน้ำแข็งที่ท่อไอเสียได้

 

เครื่องเป่าลมร้อนจะช่วยลดการเกิดน้ำแข็งเกาะได้เช่นกัน

 

เครื่องเพิ่มแรงดันแก๊ส CZPT มี ระยะชัก 120 มม. จึงช่วยลดอัตราการผลิตต่อรอบที่อัตราการไหลใดๆ ก็ตาม 

 

และแรงดันเมื่อเทียบกับแบรนด์อื่นๆ ส่วนใหญ่ อัตราการทำงานของระบบที่ต่ำกว่านี้ส่งผลให้

 

ส่งผลให้ลดปัญหาเครื่องค้างลง

 

เพื่อให้ได้ประสิทธิภาพโดยรวมที่ดีที่สุด ห้ามลดขนาดพอร์ตที่ระบุไว้ และโปรดปรึกษาผู้เชี่ยวชาญ

CZPT สำหรับสภาวะการไหลที่ไม่ได้แสดงในแผนภูมิ   

Design variety for gas booster  

 สิ่งสำคัญอย่างยิ่งที่ต้องจำไว้คือ ประสิทธิภาพของอุปกรณ์ที่ขับเคลื่อนด้วยลมนั้นขึ้นอยู่กับหลายปัจจัย 

เกี่ยวกับการจ่ายอากาศ เงื่อนไขต่างๆ ข้อจำกัดในการจ่ายอากาศอาจเกิดจากการใช้เครื่องอัดอากาศที่มีขนาดเล็กเกินไป หรือ 

สายการบิน แผนผังการไหลที่แสดงในเอกสารข้อมูลทางเทคนิคอ้างอิงจากสภาวะที่ดี

 ดังนั้นโปรดอย่า "ออกแบบตามเส้นตาย" เผื่อความสูญเสียและประสิทธิภาพไว้ด้วย  

The subsequent concern is wheather you want the booster to stall when an outlet strain is reached 

If so ,a simple airline force regulator will suffice ,but don’t forget the flow drops off significantly as the 

จรวดขับดันหยุดทำงาน

 หากคุณต้องการอัตราการไหลที่ความดันเฉพาะเจาะจง คุณต้องอ่านแผนภูมิอัตราการไหลอย่างละเอียดและรอบคอบ  

 หากคุณต้องการให้ปั๊มหยุดทำงานที่แรงดันระดับหนึ่งก่อนที่จะหยุดทำงานโดยสิ้นเชิง จะต้องติดตั้งสวิตช์แรงดันลม (air pilor switches)
 

Crucial functions

 Realiable ,Effortless to Sustain ,compact and sturdy

two. No heat,flame or spark threat

3. ความเร็วและกำลังส่งออกของการหมุนที่ปรับเปลี่ยนได้ไม่จำกัด

four. Air driven Designs do not require electrical link ,effortless to use automatic controls

5. No restrict or adverse impact to contineous end/begin applications

six.Seals method designed for lengthy doing work life,No airline lubricated required

seven.Developed-in coupling program (Most models) and ideal for most gases boosting 

Primary specialized info  

Common complex data for double phase air pushed gas booster pump  

ออกแบบ เส้นผ่านศูนย์กลางก้านลูกสูบ อัตราส่วนความเค้น Minimal inlet pressure PI(Bar) แรงดันขาเข้าสูงสุด PI (PO ) Greatest Outlet strain PO(Bar) Outlet strain system PO ขนาดพอร์ตทางเข้า Outlet porst measurement     Maximum Flow rate L/min= 7 Bar
จีพีที7/15 63/40 15:1 3.สี่ 15 124 15PA+2PI NPT3/8” NPT3/8” 215@PI=7
GBT7/thirty 63/28 32:1 สาม.สี่ สิบห้า 204 32PA+3PI NPT3/8” NPT1/4” 118@PI=seven
15/30 ปอนด์สเตอร์ลิง 40/28 32:one เจ็ด 40 204 32PA+2PI NPT3/8” NPT1/4” 150@PI=10
GBT15/forty-OL 40/twenty five สี่สิบเอ็ด เจ็ด 45 330 40PA+ 2PI NPT3/8” NPT1/4” one hundred twenty five@PI=ten
15/60 ปอนด์สเตอร์ลิง 40/20 60:1 เจ็ด 45 498 60PA+4PI NPT3/8′ NPT1/4” ninety two@pi=ten
GBT30/sixty 28/twenty 60:1 30 45 498 60PA+2PI NPT3/8” NPT1/4” 245@PI= 40
GBT30/a hundred 28/sixteen a hundred:one สามสิบ 70 830 100PA+ 3PI NPT1/4” NPT1/4” 192 @pi=forty

 Remark 1) Maxium outlet pressure are at an air driven force of eight bar or 116 PSI ,for extended life making use of

of these kinds of pump ,we propose that air driven force must be not much more than eight Bar  .

Typical software of these kinds of double stage air driven gas booster pump  

ภาพถ่ายโรงงานผลิต  

 

Usun Model: GBT30 60 Double Stage Pneumatic Gas Pressure Test Pump for Leakage Testing

แท็ก:

เรื่องล่าสุด